You know, like a quail that wails.
Anyway, here is a lovely diagram of how I'm hookin' things up.
You don't actually need the Arduino Mini USB adapter to get things cooking, you can use a regular Arduino, as shown above, if you already have one. Just be sure to remove the Atmel ATmega168 so you can connect the reset pin from the mini to the Arduino (see what I mean below). Without this, data will not transfer.
Arduino Mini
Arduino Mini USB Adapter or Arduino
Superbright LEDS
8 ohm speaker
IR Sensor
Okay, here is a photo of the Arduino without the Atmel chip.
Yes, that chip does come off! Just don't pry it off too violently, or you'll bend the pins. Mmkay?
Comments